Mechanical Reliability Test Equipment, Mechanical Testing Machine System

- English





SHOCK, VIBRATION & PACKAGING RELIABILITY TESTING EQUIPMENT

CME Technology Co., Ltd. was established in 2006, specializing in the research, development and manufacturing of mechanical environment and reliability test equipment, our test equipment mechanical products including shock /bump testing machine, drop tester, transportation simulation test table, hydraulic vibration shakers, multi-DOF motion simulation table, centrifugal constant acceleration tester, packaging test machine and etc.

// Shock/Bump Test Machine

Shock testing machine is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment.

> KRD10 Hydraulic Vertical Shock Test System > KRD11 Pneumatic Vertical Shock Test Machine

// Constant Acceleration Tester

Constant acceleration tester is used to test articles subjected to constant acceleration environment based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7.

> KRD30 Constant Acceleration Tester (Box Type) > KRD31 Constant Acceleration Tester (Arm Type)

// SRS Test Equipment

The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. Therefore, the SRS test equipment can better simulate the shock energy suffered in the real environment.

> KRD14 Pneumatic Vertical Shock Response Spectrum Test System > KRD15 Pneumatic Horizontal Shock Response Spectrum Test System

// Vibration Shakers

KRD70 Hydraulic Vibration Shaker is especially suitable for the vibration tests requiring low frequency and high force. It can realize sine, random, multi-point excitation and shock test (Sine, Random, SoR, RoR & RSTD).

> KRD70 Hydraulic Vibration Shaker

// Drop Test Machine

Drop tester is mainly used to evaluate the ability of product or packaging to withstand drops during transportation and loading and unloading, so as to improve product and packaging design.

> KRD40 Zero Distance Drop Test Machine > KRD41 Small Drop Test Machine

// Transport Simulation Vibration Testing Machine

KRD51 Transportation Bounce Testing Machine simulates the constant loose cargo state during truck transport, which meets MIL-STD-810 and ISTA Procedures 1 & 2.

> KRD50 Transportation Simulation Vibration Testing Machine > KRD51 Transportation Bounce Testing Machine

// Package Testing Equipment

Package Testing Equipment is a common test equipment for scientific research institutions, packaging technology test centers, packaging materials manufacturing plants, transportation to conduct packaging testing according to ISTA or ASTM.

> KRD100 Incline Impact Tester > KRD101 Packaging Compression Tester

// Multi-Axial Simulation Table

It is widely applied as testing or training simulators in the field of aircraft, vessel, helicopters taking off and landing, automotive, train, earthquake, motion movies, entertainment equipment and other fields.

> KRD61 6-DOF Test Table > KRD60 3-DOF Test Table

// Center of Gravity & Moment of Inertia Measurement

Center of gravity measurement system is dedicated to calculating objects by taking the sum of its moments divided by the overall weight of the object.

> KRD200 Center of Gravity Measurement System > KRD300 Moment of Inertia Measurement System

CME's Mechanical Environment Reliability Test Machine Has Been Used Widely in These Applications

"CME" brand mechanical testing system products have been provided many reliability test solutions for various fields such as aviation, aerospace, navigation, weapons, automotive, rail transportation, electronics, etc., which have been well received in the industry.

Mechanical environmental testing has become a major reliability concern in the automotive industry. CME's equipment helps engineers evaluate the shock, vibration resistance of the automotive components to confirm durability and performance.

Automotive

Package testing is an essential requirement for any product during transportation. Testing equipment are conducted to measure the impact, vibration, compression resistance of packages and products.

Transportation & Packaging

In aerospace testing, RTCA-DO-160, MIL-STD 202 and MIL-STD 810 are the most common test standards used. CME provides solutions including shock testing, vibration testing, SRS testing, and constant acceleration testing.

Aerospace & Aviation

Electrical and electronic reliability testing is the way to access a product's lifespan and identify the causes of failures.

Electronics

Today, battery technology is developing at a breath-taking pace. Nevertheless, your customers' expectations for safety and quality are as demanding as always. Battery testing addresses these by validating the safety and reliability of the batteries used in a growing range of applications.

Power & Energy

CME has been cooperated with a lot of universities, research centers and testing organizations, such as Xi'an Jiao tong university, northwest polytechnical university, northeast university, Harbin Institute of Technology, UL, SGS, Intertek, TUV and etc…

Education & Research





CME Equipment Can Perform Test According To These Standards

CME mechanical environment equipment covers wide range of testing, including shock test, vibration test, constant acceleration test, drop test, incline impact test, compression test, whatever type of international standards you need to test for your products, we have the corresponding mechanical test equipment to carry out the testing.

ABOUT US

WHO CME ARE?

CME Technology Co., Ltd. was established in 2006, specializing in the research and development and manufacturing of mechanical environment and reliability test equipment.

In 2017, CME was a listed enterprise of the growth version of Shaanxi Equity Exchange Center (enterprise code: 800059). In 2020, CME was successfully listed in the Science and Technology Innovation Special edition of Shaanxi Equity Exchange Center (code: T000025).

We currently have dozens of independent intellectual property rights and various scientific and technological achievements, and R&D technicians account for more than 60%. It has successively obtained various national qualification certifications and participated in the drafting of many national and industry standards.

MORE ABOUT CME

4000+

Systems Sold

Certificates

800+

Customers

8000

SQM Factory

CME Has Been Their Trustworthy Testing Equipment Suppliers For Years

CME Insights & Blog

Zero-Distance vs. Free-Fall Drop Testers: Choosing the Right Impact Mechanism

Apr

2025

Zero-Distance vs. Free-Fall Drop Testers: Choosing the Right Impact Mechanism

When selecting drop testing equipment for your laboratory, one of the most fundamental technical choices revolves around the release mechanism: Zero-Distance Drop versus Free-Fall Release. This decisi...